3rd Assistant Marine Engineer Job at Transocean

Transocean is the world's largest offshore drilling contractor, provides the most versatile fleet of mobile offshore drilling units to help clients find and develop oil and natural gas reserves. Building on more than 50 years of experience with the highest specification rigs, our approximately 18,000 employees are focused on safety and premier offshore drilling performance. Copied from: www.hotnigerianjobs.com


We are currently recruiting for the position of:

Job Title: 3rd Asst Marine Engineer - Nigeria Nationals
Job ID: 2000796
Location: Lagos
Reports to: The Second Assistant Engineer

Job Description

• Supervises the Motor Operator.

Basic Function:

• Assist in maintaining and repairing mechanical, pneumatic and hydraulic equipment onboard the vessel.

Duties and Responsibilities 
Operations/Maintenance:

• Ensure conformance to Company policies, local and international regulations relating to the operation of the rig, and current pollution regulations - Authority I
• Perform daily inspections and maintenance on mechanical equipment - Authority I
• Ensure compliance with the Rig Maintenance System (RMS) and ensure all records are maintained on a timely basis - Authority II
• Carry out periodic maintenance according to RMS guidelines and coordinate that maintenance with supervisors and other department heads - Authority II
• Ensure that reports for repair and maintenance of equipment are accurate and complete - Authority II
• Assist with maintenance and repair of power plants, cooling water system, lube oil system, and fuel system - Authority II
• Assist in troubleshooting and repairing faulty mechanical, pneumatic and hydraulic drilling equipment and tools - Authority II
• Assist in maintaining marine equipment, i.e. cranes, thrusters, ballast pumps and valves, auxiliary equipment, etc. - Authority II
• Apply the permit to work and isolation systems as required - Authority I
• Assist in implementing outstanding recommendations from audits, as issued by Clients, Regulatory Authorities or rig management - Authority II
• In conjunction with the Second Engineer, monitor and control the use and distribution of consumables/materials; generate requisitions as required - Authority II
• Assist in ensuring that all third-party equipment is fit for purpose, certified, correctly installed, and maintained while on the rig - Authority II
• Ensure that service, maintenance and other operational reports are accurate and complete - Authority I
• Inform supervisor and other department heads of any technical problems or limitations that may affect the safe operation of the rig - Authority I
• Carry out classification society surveys as part of continuous survey of machinery - Authority I

QHSE:

• Incorporate the THINK planning process into all tasks, whether working alone or as part of a team - Authority I
• Participate in the START Process - Authority I
• Ensure that subordinate personnel are properly trained in the START process - Authority I
• Call a Time Out for Safety (TOFS) whenever an unplanned hazard or a change in the expected results is observed - Authority I
• Ensure compliance with regulatory requirements for environmental protection - Authority I
• Actively participate in weekly safety meetings and pre-job meetings as required - Authority I
• Respond to emergency situations and environmental protection issues as per designation on station bill - Authority II
• Report any incidents, potential hazards or abnormal situations to supervisor and other department heads - Authority I
• Ensure that a high standard of hygiene and housekeeping is maintained onboard the rig - Authority I
• Personnel:
• Meet the training requirements according to the applicable training matrix - Authority I
• Participate fully in the annual performance appraisal process - Authority I
• Mentor, develop and train crew members to ensure that they are competent to work at their next job level - Authority II
• Supervise and guide the Motor Operator and Mechanic Trainee in their On-the-Job Training (OJT) program - Authority I
• Maintain discipline onboard and ensure compliance with Company disciplinary procedures - Authority I

Definition of Decision Making Authority:

• Authority I: To act.
• Authority II: To act but inform supervisor and/or other interested parties
• Authority III: To obtain supervisor's approval before acting
• Note: The above is not a complete list of duties but a guide, as tasks and objectives can change depending on needs.in discipline onboard and ensure compliance with Company disciplinary procedures - Authority I

Definition of Decision Making Authority:

• Authority I: To act
• Authority II: To act but inform supervisor and/or other interested parties
• Authority III: To obtain supervisor's approval before acting
• Note: The above is not a complete list of duties but a guide, as tasks and objectives can change depending on needs.

Qualification

• High school diploma or equivalent. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
• Valid 3rd Engineer Unlimited License (Class 3 Motor above 3000kW).
• Valid medical examination and vaccination certificates.
• Knowledge of technical calculations required for mechanical operations and basic computer skills.

Application Closing Date
20th February, 2014.

Method of Application
Interested and qualified candidates should:
Click here to apply online